Compression Rebar Coupler
RHINO Compression Rebar Coupler is an easy to install rebar coupler, perfect for applicaitons requiring a compression only connection. The system is designed to allow compressive loads to be transferred by aligning square cut reinforcing steel bar ends.
- Bars can be individually secured
- Fast, one-person installation
- Requires only a lightweight ratchet wrench to install
- Self supporting; no tack welding is needed
- Easily removed and reused
- Meets ACI 318, Type 2 (Compression Only)
| Part # | Rebar Size Metric | Rebar Size (US) | Rebar Size (Canada) | L1 (mm) | L1 (in) | D1 (mm) | D1 (in) | Weight (lbs) |
|---|---|---|---|---|---|---|---|---|
| CC25 | 25mm | #8 | 25M | 152 | 6.00 | 36 | 1.41 | 1.70 |
| CC28 | 28mm | #9 | 30M | 152 | 6.00 | 39 | 1.53 | 1.90 |
| CC36 | 36mm | #11 | 35M | 203 | 8.00 | 48 | 1.88 | 2.00 |
| CC43 | 43mm | #14 | 45M | 203 | 8.00 | 56 | 2.19 | 3.00 |
| CC57 | 57mm | #18 | 55M | 203 | 8.00 | 76 | 2.98 | 3.90 |
Warning
RHINO products shall be installed and used only as indicated in RHINO's product instruction sheets and training materials. Instruction sheets are available at www.rhinoconnections.com and from your RHINO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow RHINO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.